2008 Yaris

1. Driveres door open & unlocked. Key out of ignition
2. Insert & remove key 2 times within 5 seconds
3. Close & open drivers door twice within 40 seconds
4. Insert key into ignition & remove
5. Close & open drivers door twice within 40 seconds
6. Insert key into ignition
7. Close the door


8. Turn ignition switch from "LOCK" to "ON" & back to "LOCK"
   • ONCE for ADD mode
   • TWICE for REWRITE mode
9. Remove the key from ignition
10. To confirm your mode selection, the power locks will now cycle "lock" to "unlock" a number of times corresponding to your key cycles in step 8
11. Within 40 seconds of confirmation
    • Press both transmitter Lock & Unlock buttons simultaneously
    • Within 3 seconds press transmitter Lock button for more than 1 second
    • If successful, the power locks will cycle once (twice indicates transmitter problems)
    • Repeat step 11 for additional remotes
12. Open door to exit programing