2002 Avalon
- Start with the key out of the ignition, drivers door is open all others closed and drivers door is unlocked.
- Perform these steps within 5 seconds.
- Insert the key into the ignition(Do NOT Turn) Pull key out.
- Insert the key into the ignition(Do NOT Turn) Pull key out.
- Perform these steps within 40 seconds.
- Close then open the drivers door.
- Close then open the drivers door.
- Insert the key into the ignition (Do NOT Turn) Pull key out.
- Perform these steps within 40 seconds.
- Close then open the drivers door.
- Close then open the drivers door.
- Insert the key into ignition and leave it in ignition.
- Close the drivers door.
- Turn the ignition to ON (Do NOT Start) then back to OFF.
- Remove the key from the ignition.
- Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point.
- Perform these steps within 40 seconds.
- Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds.
- Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted.
- Repeat steps A and B in step 6 for each new remote.
- Open drivers door.
Tip from user of these instructions:
I have a 2002 Toyota Avalon made in 01/02. Your instructions for the 2002 didn’t work so I noticed they had changed from the 2001. So I tried those instead and it worked!