Disclaimer: The information in this site is provided to you as a free service. We strive at ProgramAutoRemote.com to have the most current and accurate information. ProgramAutoRemote.com and its creators assume no responsibility for the accuracy or inaccuracy of the information provided.

spacer

2001 Mercury Villager Key Fob Programming Instructions

2001 Villager

  1. Close and lock all doors using power switch on drivers door panel.
  2. Insert and remove key from ignition (Do Not Turn) at least 6 times within 10 seconds. The hazard lights will flash to indicate original code has been erased.
  3. Insert key and turn to ACC position. Press any button on first keyless remote. Hazard lights will flash to confirm programming.
  4. To program additional keyless remotes, unlock and then lock the doors using power switch on drivers door panel.
  5. Press any button on second keyless remote. Hazard lights will flash to confirm programming.
  6. Open drivers door and remove key from ignition. Test remotes.