Disclaimer: The information in this site is provided to you as a free service. We strive at ProgramAutoRemote.com to have the most current and accurate information. ProgramAutoRemote.com and its creators assume no responsibility for the accuracy or inaccuracy of the information provided.

spacer

2004 Kia Sedona Key Fob Programming Instructions

2004 Sedona

This is the layout of jumper pins.
  1 2                      3 4
 5   6   7   8   9  10 11 12
13 14 15 16 17 18 19 20

ONLY ONE REMOTE CAN BE PROGRAMMED TO THIS VEHICLE.

  1. Open Hood and locate diagnostic connector near battery
  2. Jump pin 5 to pin 17 with a suitable jumper wire.
  3. Turn ignition to the ON position. ( DO NOT START)
  4. Press LOCK button of remote two times.
  5. Turn ignition OFF and remove key.
  6. Disconnect jumper from diagnostic connector.
  7. Check for lock and unlock operation. Horn will sound when locking.