Disclaimer: The information in this site is provided to you as a free service. We strive at ProgramAutoRemote.com to have the most current and accurate information. ProgramAutoRemote.com and its creators assume no responsibility for the accuracy or inaccuracy of the information provided.

spacer

1995 BMW M3 Key Fob Programming Instructions

1995 BMW M3 with Keyless Entry System
FCC ID : A269ZUA110 with Key Fob FCC ID : A269ZUA111

  1. Close the doors, hood, and trunk with car unlocked.
  2. Open the trunk lid.
  3. Open the driver’s door.
  4. Sit in the driver’s seat.
  5. Close the driver’s door.
  6. Put the key in the ignintion. You must do these first five steps within 45 seconds.
  7. Cycle from the off position to the (“almost start”) second position five times. Do this step within 10 seconds.
  8. Open the driver’s door.
  9. Close the driver’s door.
  10. On the remote: Press the large button.
  11. On the remote: Press the small button.
  12. On the remote: Press the large button and hold until it flashes once.
  13. On the remote: Press the small button and hold until it flashes once.
  14. Up to four remotes can be recognized by the car’s alarm system. As they are recorded, the oldest remote information will be overwritten.
  15. Open the driver’s door.
  16. Get out of the car.
  17. Close the trunk lid.
  18. Close the driver’s door.
  19. The programming is complete.

Test and Enjoy.