Disclaimer: The information in this site is provided to you as a free service. We strive at ProgramAutoRemote.com to have the most current and accurate information. ProgramAutoRemote.com and its creators assume no responsibility for the accuracy or inaccuracy of the information provided.

spacer

1998 Ford Windstar Key Fob Programming Instructions

1998 Windstar

Use this procedure for early built 1998 Windstar

  1. Turn ignition from OFF to RUN 5 times within 10 seconds, with the 5th time ending in RUN. Door locks will cycle to confirm programming mode.
  2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.
  3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.
  4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

Use this procedure for late built 1998 Windstar

  1. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode.
  2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.
  3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.
  4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.