Disclaimer: The information in this site is provided to you as a free service. We strive at ProgramAutoRemote.com to have the most current and accurate information. ProgramAutoRemote.com and its creators assume no responsibility for the accuracy or inaccuracy of the information provided.

spacer

2008 Ford Explorer Key Fob Programming Instructions

2008 Explorer

  1. Close all doors and then open drivers door and press the UNLOCK button on drivers door panel while door is open and insert key in ignition.
  2. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode.
  3. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.
  4. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.
  5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.